Your current browser version is too low, in order to bring you a better browsing effect, please use a higher version browser

home> Product> AEM Water Electrolysis Equipment

AEM Water Electrolysis Equipment


Equipment advantages:
☼ Very low cost Modular ☼ high efficiency
☼ Available rain or tap water ☼ Simple and compact
☼ Powered by the grid or renewable energy

Equipment characteristics:
☼ The capacity can be 0.5 to 10 Nm³/hr
☼ Each module produces 0.5 Nm³ or 500NL per hour
☼ Can be installed in a standard 19-inch cabinet
☼ Only 4.8 kWh per 1 Nm³ of hydrogen
☼ Can pre-compress hydrogen to 35bar
☼ Option to install a 99.999% purity dryer

safety standard:
All communications use strong transport layer security protocol 1.2 (TLS 1.2)
Our authorization system is based on X.509 certificate and has 2048-bit encryption key.Data is stored in the highest Tier 4 (Tier 4) green data center, highly reliable, and passed ISO27001:2013 certification.


Hydrogen production


Operating pressure


Operating consumption rate (under normal conditions)


Peak power consumption (maximum power consumption at any time)


Power options

100 to 240 volts wide voltage, 50 to 60 Hz

Water consumption

0.4 L/hr

Water quality requirements and electrical conductivity

 <20 microseconds (25℃) micro West (menzi) per centimeter

Water pressure input requirement


Ambient temperature


Environmental humidity


Dimensions (WxDxH)

 483x490x354 mm (8U)

Weight (without water)

53 kg

Send Your Message